Synergy Series
Protected by US Patent No. US 10,428,965
Cure Time Optimization, Realization, & Reduce Energy Consumption
Cure Time Optimization & Realization: Pneumatic valves suffer from losses in both time and accuracy caused by stick slip and hysteresis. Also, repeatability is lost due to inconsistencies in traditional pneumatic actuated systems. Synergy Series eliminates these problems and ensures exact position control to maximize the cure model.
Reduced Energy Consumption: Synergy Series eliminates the need for compressed air valve actuation. This significantly reduces energy bills and large capital investments associated with air compressors, air dryers, compressed air piping, solenoid valves, I/P’s etc.
Features
Pressures up to ASME 600# class
Process temperature range -40°F to 450°F (-40°C to 231°C)
Connection sizes from ¼”-2”
Multiple trim sizes and flow profiles in each connection size
Internal spring returns the valve to the original open or closed position upon signal loss, power loss or E-stop
Normally Closed or Normally Open designs
Stainless steel wetted components to ASME material standards
Advanced engineered thermal plastic used for critical sealing components
Compatible with most process fluids, both liquids and gases
Cv ratings from .05 to 56.7
Globe style or angle style designs available
82,000 discrete positions per inch of travel
Speeds up to 1” of travel per second
Ambient temperature rating of 180° F (82° C)
Benefits
Servomotor-actuated position control with internal smoothing of PLC analog output signal
Soft-Seated, positive shutoff, engineered sealing edge meets highest ANSI/FCI 70-3 Class VI leakage rate standards
Energy efficient: eliminates compressed air, tubing, fittings, I/P, regulators, solenoids, dryers
Instantaneous reaction time (small dead time or lag)
Reduction in hysteresis
Repeatable, due to high resolution encoder
Elimination of stick slip
Longer service life: estimated 10.5 years
Reduced and simplified maintenance
Ability to rehome and reseat to maintain positive shutoff
Increase in stiffness to negate the effects of upstream process condition changes
Automatic initialization for easy setup
Communication
The Synergy Series line of valves is very versatile in its ability to speak a multitude of languages, protocols, and drive commands. From the most simple analog 4-20 mA plug and play, to the more sophisticated protocols such as Ethernet/IP, the Synergy Series valves can be configured to speak with your PLC or be integrated with a stand alone PLC for an all-in-one solution.
Analog 0-20 mA
Analog 4-20 mA
Analog 0-10 Volts
Analog 0-24 Volts
Digital Step and Direction
Ethernet
Ethernet/IP
ProfiNet
Modbus TCP
EtherCat
CANopen
RS-485
24V I/O input
Modular Design
The Synergy Series line of valves is modular. Rather than replacing the entire valve when a component fails, the user can replace just the needed component. This allows for a decrease in store room inventory and increased up-times as the valve may be serviced in line.
